| GigaVUE® 420 |
The GigaVUE® 420 is a modular packet-aware Data Access Switch supporting 10/100/1000 & 10Gig Ethernet.
GigaVUE-420 aggregates, multicasts, filters, & divides traffic
flows across multiple passive monitoring tools. It is a purposebuilt
hardware switch capable of full line rate performance and
transfer latency of only 6 μsec. Nearly any number of traffic
sources may be aggregated, filtered, & then distributed to one
or more monitoring tools at any speed. Hardware filters based
on any element in the 126-byte header may be enabled to
eliminate unwanted packets. The system is managed remotely
by telnet or SSH2 & authenticated with TACAC+ or RADIUS.
>> View Presentation
>> View Product Brief
Features:
- Any-to-Any connectivity to solve tool deployment problems
- Aggregate multiple links to consolidate tools
- Multicast to multiple tools to share data sources
- Intelligently filter and divide loads to customize and
manage data to different tools
- Solutions for monitoring asynchronously routed Ethernet
networks including 10 GigE
- Hardware based design for full line rate performance and
near-zero latency
- Advanced security features protect your data
Benefits:
- Immediate ROI by consolidating distributed tools and
reducing management expense
- Affordable solution to 10 Gig monitoring
- Accurately measure time sensitive protocols and QoS
- Reduce packet loss to improve monitoring fidelity
- Support continuous monitoring and scalable growth with
hot-swap modules
- Save rack space, cost, & complexity with optional integrated
taps
Applications:
- Isolate & capture sessions across multiple links and switches
- Share scarce span ports between multiple tool
- Reduce and customize data flow to each tool
- Divide large loads across multiple tools
- Monitor 10G links with legacy 1G tools
- Aggregate multiple links simultaneously to multiple tools
|
| |
| GigaPORT Expansion Module |
The GigaPort Expansion adds 4 ports. Each port can
be independently set as 10/100/1000 Base-T RJ-45 Ethernet, or 1000 Base-Sx/Lx/Zx Ethernet with multimode or singlemode SFP.
Optional Accessories:
- SFP (optical transceiver):
- Sx 850 nm (550Meter)
- Lx 1310 nm (10km)
- Zx 1550 nm (40km)
|
| |
| GigaTAP-Sx, GigaTAP-Lx, GigaTAP-Zx |
The GigaPort Expansion adds 4 optical splitter ports: can tap two MM or SM FDX fiber links. Split ratio 70/30.
Link TAP Mechanism:
- Links protected by passive optical splitter (split ratio 70/30).
|
| |
| GigaTAP-Tx |
The GigaTAP-Tx adds four RJ-45 ports organized as two pairs; each pair taps a single 10/10/1000 Base-T FDX Ethernet link.
Link TAP Mechanism:
- Electronically repeats the
link signals when in ACTIVE
mode and port-pairing
established.
Optional Accessories:
- SFP (optical transceiver):
- Sx 850 nm (550Meter)
- Lx 1310 nm (10km)
- Zx 1550 nm (40km)
|
| |
| |
| |
| GigaLINK-SR, GigaLINK-LR, GigaLINK- ER |
The GigaLINK -SR, -LR, or -ER adds one 10 Gigabit Ethernet fiber optic port to the GivaVUE-420. XFP included.
Link TAP Mechanism:
- GLK-312 10 Gig port with XFP SR 850 nm (300 Meter) transceiver, LC connector
- GLK-313 10 Gig port with XFP LR 1310 nm (10 km) transceiver, LC connector
- GLK-314 10 Gig port with XFP ER 1550 nm (40 km) transceiver, LC connector
Optional Accessories:
- XFP (Spare 10G optical transceiver):
- XFP-502 SR 850 nm (300 Meter)
- XFP-503 LR 1310 nm (10 km)
- XFP-504 ER 1550 nm (40 km)
|
| |
| GigaLINK-Cu (10G Copper) |
The GigaLINK-Cu adds one 10 Gigabit Ethernet copper CX-4
port.
Optional Accessories:
- Stacking cable: CX4 copper cable (5/10/15 Meters)
|
| |